REMOVING CLOGS
When the hose is clogged with dust, remove it in the following manner:
1.Pull out the handle by turning the removal ring in either direction.
2.Remove any clogs in the handle. Shake the hose to remove any clogs.
3.Insert the handle in place and return the ring to its original position.
Ring
4.Check the dust filter cover in the dust bin and clean if necessary (See DUST BIN CLEANING, page 14).
5.Check the secondary filter and clean if
necessary (See SECONDARY FILTER CLEANING, page 16).
6.Check exhaust filter and replace if necessary. (See REPLACING EXHAUST FILTER, page 15).
CAUTION
Product Damage Hazard
Do not use the hose without the handle in
place. If the hose is used without the handle, the hose will bend excessively, causing it to crack.
CLEANING EXTERIOR AND ATTACHMENTS
1.Turn off and unplug vacuum cleaner. DO NOT drip water on vacuum cleaner.
2.To clean exterior, or to reduce static
electricity and dust
ments. Use a clean, soft cloth that has been dipped in a solution of mild liquid
detergent and water, then wrung dry. Wipe dry after cleaning.
CAUTION
Do not use attachments if they are wet.
Attachments used in dirty areas, such as
under a refrigerator, should not be used
on other surfaces until they are washed. They could leave marks.
12