EVGA Digital TV Tuner, EV3A owner manual Question, Answer

FAQ

Question:

How do I manually run inDtube’s Installation Menu from the CD?

Answer:

To manually run inDtube’s Installation Menu from the CD go to: Start Run type in the letter designated to your CD-ROM Drive followed by “Autorun.exe” For example: if the letter designated to your CD-ROM drive is E:\ you would type it as follows: Start Run E:\Autorun.exe Once you have typed in the command, click OK. inDtube’s Installation Menu should now appear.

Note: If in Vista, follow this path: Start in the search box type “Run” and press the Enter Key. Now type in the letter designated to your CD-ROM drive followed by “Autorun.exe”

Example: E:\Autorun.exe

Question:

Can both an Antenna and Cable or Satellite box be used at the same time for dual TV Tuner support?

Answer :

No, InDtube will only support one connection at a time.

Question:

Certain channels do not come through when using a coax line, cable, or satellite set-top box.

Answer :

Depending on your service provider certain channels are distributed in an encoded signal that requires a QAM tuner. These channels can not be decoded by inDtube because it has no QAM tuner.

Question:

Does inDtube work with Windows Media Center 2005?

Answer :

Yes, you will need the MCE Encoder software. Visit www.evga.com/faq for more information on obtaining the MCE Encoder software.

11