EVGA X58 FTW3, 132-GT-E768 manual

EVGA FTW3 Motherboard

1 - I/O Shield

Installs in the system case to block radio frequency transmissions, protect internal components from dust, foreign objects, and aids in proper airflow within the chassis.

3- 2-Port SATA Power Cables

Allows a Molex power connector to adapt to a SATA power connector.

1 - IEEE1394a (Firewire) Bracket

Provides one (1) additional IEEE1394a port to the back panel of the chassis.

1- 4-Port USB 2.0 Bracket

Provides four additional USB ports to either the front or back panels of the chassis.

6 - SATA Data Cables

Used to support the SATA protocol and each one connects a single drive to the motherboard.

1 - IDE Data Cable

Passes data between the IDE connection on the motherboard and IDE device.

1- 2-Way SLI Bridge

Bridges two (2) graphic cards together which allows for 2-Way SLI.

1- 3-Way SLI Bridge

Bridges three (3) graphic cards together which allows for 3-Way SLI.

1 - Installation CD

Contains drivers and software needed to setup the motherboard.

13