assembly instructions
ASSEMBLY
Step 5:
Cap Leg Curl (207) with three 2" Sq End Plugs (215). Attach Stopper (220) to Leg Curl (207) using 3/8" x 5/8" Inner Hex Head Screw (232). Insert two 1/2" Steel Bushings (225) to the hole in Leg Curl (207). Attach Leg Curl (207) to the bracket on Inner Tube (206) using Axle (219), two 5/16" Washers (236), two 5/16" Spring Washers (239), and two 5/16" x 5/8" Inner Hex Head Screws (233). Lock Leg Curl (207) with Lock Pin (224).
Insert two Bolsters (208) through the holes in Leg Curl (207) and fix with 5/16" x 1/2" Set Screw (234). Slide two 4" Foam Pads (211) onto Bolster (208) and cap with 1" End Plugs (217).
217
211
208 
211
217
215
|
| 233 | 239 |
|
| 236 | |
|
|
| 219 |
|
|
| 206 |
| 215 |
|
|
225 | 225 | 232 |
|
|
| ||
207 | 220 | 234 |
|
|
| 211 |
|
234 |
| 217 |
|
|
|
| |
| 215 | 208 | 211 |
217
202
236
239
224
233
