Evo Fitness 53552, EVO SIERRA Home Gym Leg Press Attachment owner manual Assembly

instructions	ASSEMBLY
assembly

Step 3:

Insert two 50 Sq Bushings (221) into the upper tube on the Main Frame (202). Slide the Hand Grips (212) onto the Seat Handle Bars (204). If the Hand Grips

(212)are difficult to slide onto the Seat Handle Bars (204) try applying a small amount of soapy water to the Seat Handle Bars (204) prior to sliding on the grips. Attach the Seat Hand Bars (204) to the Main Frame (202) using two 3/8" x 3" Hex Head Bolts (230), four 3/8" Washers (236) and two 3/8" Nylon Nuts

(238).Attach a Seat / Back Pad (211) to the Main Frame (202) using two 3/8" x 2-1/2" Hex Head Bolts (232) and two 3/8" Washers (236) as shown in FIG 1.

Cap the Adj Back Bone (209) with two 1" x 2" Rect End Plugs (219) and one 50 Sq End Plug (217). Attach a Seat / Back Pad (211) to the Adj Back Bone

(209)using two 3/8" x 1-1/2" Hex Head Bolts (233) and two 3/8" Washers (236). Insert the Adj Back Bone (209) assembly into the upper tube (welded on Main Frame) and lock with the Quick Release

(225)as shown in FIG 2.

FIG-1
		211
			212
	201				238
			221		236
212					204
	236
204
			232	203	221
230	236
			202
FIG-2
211			219
			236
			233
	219		209
	236	233	201
			217
					225
					203
-8-