27
EVO2 MOTORIZED TREADMILL
TROUBLESHOOTING
Troubleshooting
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
1.Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet and the surge protector is turned on (refer to the Power Requirements section in this manual).
2.Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press the rest switch.
3.Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped, reset or have an electrician replace the breaker in home.
4.Have an electrician check for inadequate voltage at the outlet.
Treadmill looses power during use:
1.Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press the rest switch.
If the treadmill still will not operate, please call Technical service at 1.888.800.1167.
2.Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped, reset or have an electrician replace the breaker in home.
Treadmill walking belt slows during use:
1.Check to make sure the treadmill is securely plugged into an
Treadmill walking belt slips or is not centered on rear roller:
Refer to the Belt Adjustment section of this manual. If you require additional assistance please call Technical service at 1.888.800.1167.
Visit us at: www.evofitness.com
