FX30 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
19
STABILIZER ADJUSTMENT How to level the treadmill:
An uneven floor or improper stabilizer level can cause the treadmill to wobble during use as well as the incline
adjustment to function incorrectly. Please follow the procedure described below to make sure the treadmill stabilizer
is adjusted correctly prior to use. You may need the assistance of another person to perform this adjustment.
1. To perform the stabilizer adjustment you first need
to bring the treadmill to the highest incline level as
shown in drawing 1. After you’ve completed the
assembly procedure plug in the power cord and
switch on the POWER SWITCH. Insert the Safety
Key and press the START button to quick start the
treadmill. Press the INCLINE UP button until the
deck reaches its highest incline level. Now press
the STOP button and pull out the Safety Key.
Switch off the POWER SWITCH and unplug the
power cord.
1. Raise deck to highest incline level.
2. Inspect the two stabilizers (one per side) located
underneath the base frame. The treadmill should
sit on the floor with both stabilizers and all four
cushions resting firmly on the floor as shown in
drawing 2. Shake the handlebars back and forth to
check if they are resting firmly on the floor. If they
are not, pull the handlebar backward to adjust the
stabilizers as shown in drawing 3. Simply turn the
stabilizers like a screw to adjust their heights.
Repeat this until the treadmill sits firmly on the
floor.
2. Check position of stabilizers and cushions.
3. Tilt treadmill to access stabilizers.