Excalibur electronic H691 Using the Flashlight, Using the Radio, Using the Blinker, and Siren

Using your unit

with regular batteries. 1. Turn the unit off.

batteries as the main power source, slide POWER switch to the AUX.BAT position.

To turn off the flashlight,	ON, this is important unless
switch the light switch to	you want to access your
OFF.	BACK-UP BATTERIES. Then

2. Use your

BATTERYlocat-

Using the Flashlight

How to replace the	select	BLINK/SIREN at your
Flashlight Bulb.	POWER	switch. This will

edCOMPARTMENTat the bottomDOORof your unit. Open the compartment door with a coin or a screw- driver.

3. Insert three C batter- ies, not included. Be sure to insert the battery with the correct polarities (+ and -). For more information on the batteries, see pages 3 and 17.

4. Replace the batteries when the sound becomes distorted or the flashlight becomes dim.

5. To utilize the back-up

Your Forever Flashlight

10-in-1 Lantern includes an ultra bright LED bulb and a traditional white bulb. The LED energy saving light uses minimal power con- sumption when turned on. You then can switch to the second option and use the traditional light bulb.

Slide the POWER SELEC-

TION switch to ON. This is important unless you want to access your BACK-UP BATTERIES. Then switch

your ON/BLINK/SIREN/OFF

to the ON position. This will turn the LIGHT function on.

Simply turn off your unit				turn the BLINKER function
				on.
and and open your FLASH-
				To use the BLINKER and
LIGHT	COVER.	Press	the
rubber cover to release the				SIREN	simultaneously, first,
inner	flashlight cover		to	select	the	BLINK/SIREN at
retrieve the spare light bulb.				your power switch and then
Then simply reach into the				turn on the		VOLUME knob.
unit and replace the bulb.				This will turn the BLINKER
Remember to		when your		function on. Then turn on
bulbs burn out to match				the VOLUME knob.
with similar voltage bulb.
Close	the	FLASHLIGHT		Using the Radio
COVER	and the light bulb
replacement		process	is	Your Forever Flashlight
complete.				10-in-1 Lantern can tune
				the AM/FM radio stations.
Using the Blinker				To use the radio, first, slide
				the POWER		switch to ON,
and Siren				this is important unless you

Excalibur Electronics reserves the right to make technical changes without

notice in the interest of progress.

12

To use the BLINKER, first,	want to access your BACK-
slide the POWER switch to	13UP BATTERIES.