Exmark 000 & higher Seat, Hydrostatic Ground Drive System, Tires and Wheels, Specifications

Specifications

–Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.

–Steering is controlled by varying the position of the levers relative to each other.

–Moving motion control levers outward (in slots) locks the drive system in neutral.

•PTO Engagement Switch: Engages electric clutch (to drive belt) which engages mower blades.

•Parking Brake Lever: Engages/Disengages parking brake.

•Deck Height Adjustment Lever: Sets cutting height to desired position.

•Deck Lift Pedal: Foot pedal that lifts deck.

•Transport Lock:

–Latching position: Automatically latches at the transport position.

–Unlatching position: Deck does not latch at the transport position.

Seat

•Type: Standard seat with high back, extra wide foam padded seat cushion with internal suspension, thick bolstering, armrests, integral safety switch.

Optional seat accessories for units with standard seats:

–Custom ride suspension system to enhance Standard Seat. Adds approximately 3 inches (7.6 cm) to seat height.

–Deluxe suspension seat with high back, (adjustable spring suspension), armrests, and integral safety switch. Adds approximately 1/2 inch (1.3 cm) to seat height.

–Seat Isolation System for reduced vibration, to enhance ride of standard seat, standard seat with Custom Ride Seat Suspension or Deluxe Suspension Seat. Adds approximately 1 inch (2.5 cm) to seat height.

•Mounting: Adjustable fore and aft on seat tracks.

•Armrests:

–Standard seat: foam padded adjustable flip-up armrests.

–Suspension seat: foam padded adjustable flip-up armrests.

•Seat Safety Switch:

Integrated seat switch. Time delay seat switch eliminates rough ground cut-outs.

Hydrostatic Ground Drive System

•Two unitized hydrostatic transmissions: 12cc Parker axial piston pump

240cc Parker geroler motor

•Hydraulic Oil Type: Exmark Premium Hydro Oil.

•Hydraulic Oil Capacity: 52 oz (1.5 L) per side

•Hydraulic Filter: P/N 116-0164

•Speeds:

–0-10 mph (16.1 km/hr) forward.

–0-5.5 mph (8.9 km/hr) reverse.

•Drive wheel release valves allow machine to be moved when engine is not running.

Tires and Wheels

			Drive
	Pneumatic (Air filled)
Deck Size	48 & 52			60 & 72
Quantity	2			2
Tread	Turf Master			Turf Master
Size	24 x 9.50-12			24 x 12.00-12
Ply Rating	4			4
Pressure	13 psi (90 kPa)			13 psi (90 kPa)
			Front Caster
			Semi-Pneumatic
Deck Size		48, 52, & 60 (except
		LZS740KC604 &
		LZS740KC604CA)
Quantity		2
Tread		Smooth
Size		13 x 5.00-6
Ply Rating		4
Pressure		N/A
			Front Caster
			Semi-Pneumatic
Deck Size		72, LZS740KC604 &
		LZS740KC604CA
Quantity		2
Tread		Smooth

17