Exmark 850, 000 & higher manual Product Overview, Operation, Controls, Blade Control Bail

Operation

Product Overview

Figure 3

1.	Grass bag	5.	Discharge door
2.	Handle	6.	Rear wheel height
			adjustment
3.	Drive Bail	7.	Front wheel height
	(Self-Propelled Units		adjuster
	Only)

4.Blade Control Bail

Operation

Note: Determine the left and right sides of the machine from the normal operating position.

Controls

Blade Control Bail

Located on the upper handle as shown in Figure 4.

When the blade control bail is depressed, the system senses that the operator is in the normal operator’s position.

•For Units with a Blade Brake Clutch: When the blade control bail is released, the system senses that the operator has moved from the normal operating position and will stop the blade.

•For Units without a Blade Brake Clutch: When the blade control bail is released, the system senses that the operator has moved from the normal operating position and will kill the engine.

Figure 4

Blade Brake Unit Shown

1.Blade control lock lever (Blade Brake Units Only)

2.Blade control bail

3.Handle

4.Drive bail (Self-Propelled Units Only)

Self-Propel Drive Bail (Self-Propelled Units Only)

Located on the upper handle as shown in Figure 4.

When the self-propel drive bail is squeezed, the unit will move forward based on how far the bail is depressed toward the handle. When this bail is released the unit will stop moving.

13