Exmark 4500-355 manual Recommended Maintenance Schedules

Models: 4500-355

1 44
Download 44 pages 24.01 Kb
Page 20
Image 20
Maintenance

Maintenance

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s) WARNING

While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.

Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

Manual background WARNING

The engine can become very hot. Touching a hot engine can cause severe burns.

Allow the engine to cool completely before service or making repairs around the engine area.

Recommended Maintenance Schedule(s)

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

 

After the first 5 hours

Change the engine oil.

 

 

 

After the first 100 hours

Check wheel hub-slotted torque specification.

 

 

 

After the first 250 hours

Change the hydraulic filter.

 

 

 

• Check the engine oil level.

 

Check the mower blades.

 

• Check the safety interlock system.

Before each use or daily

Check for loose hardware.

• Grease the caster wheel bearings.

 

 

Grease caster pivots.

 

• Clean engine air cooling system (See Engine Owner’s Manual)

 

• Clean the grass build-up from under the deck.

 

 

Every 25 hours

• Service the air cleaner. (May need more often under severe conditions. See the Engine

 

Owner’s manual for additional information.)

 

 

 

 

 

• Check the hydraulic oil level.

 

• Check the tire pressures.

Every 40 hours

• Check the condition of the belts.

• Grease the pump drive idler pivot.

 

 

• Grease the pump control bearings.

 

• Grease the mower deck idler pivot

 

 

 

Every 80 hours

Remove engine shrouds and clean cooling fins.

 

 

 

Every 100 hours

Change the engine oil. (May need more often under severe conditions.)

 

 

 

Every 160 hours

Check the spark plugs.

 

 

Every 500 hours

• Change the hydraulic filter (Every 250 hours/yearly if using Mobil 1 15W50)

• Check wheel hub-slotted torque specification.

 

 

 

 

Monthly

Grease the PTO engagement bellcrank.

 

 

 

20

Page 20
Image 20
Exmark 4500-355 manual Recommended Maintenance Schedules