Exmark 850 Specifications, Model Numbers, Systems, Engine, Safety Interlock System, Fuel System

Models: 00 & Higher 850

1 52
Download 52 pages 62.21 Kb
Page 16
Image 16
Specifications

Specifications

Specifications

Model Numbers

Serial Nos: 850,000 and Higher

QSP20BV443; QSP20KAS443; QSP20KAS483; QSP20KAX443; QSP22KAS523

Systems

Engine

Engine Specifications: See your Engine Owner’s Manual

RPM:

20HP Briggs & Stratton

Full Speed: 3750 ±50 (max) RPM (PTO not

engaged) Idle: 1650 (min) RPM

20HP & 22HP Kawasaki

Full Speed: 3750 ±50 (max) RPM (PTO not

engaged) Idle: 1550 (min) RPM

Safety Interlock System

LCD indicators appear for the PTO, park brake, drive levers, and operator presence in the message display on the RH control panel.

PTO must be disengaged, brake engaged, and motion control levers out (neutral lock) to start engine. (It is not necessary for the operator to be in the seat to start the engine.)

Operator must be in seat when PTO is engaged, brake is disengaged, or motion control levers are moved in or engine will stop.

Engine will stop if either the left, the right, or both levers are moved from neutral lock position while brake is engaged.

Fuel System

Capacity: 4.0 gal. (15.1 L)

Type of Fuel: Regular unleaded gasoline, 87 octane or higher; containing no more than 10% methanol or ethanol.

Fuel Filter:

Briggs & Stratton P/N 691035 Kawasaki P/N 49019-7005

Fuel Shut-Off Valve: 1/4 turn increments (“ON”, “OFF”)

Electrical System

Charging System: Flywheel Alternator

Charging Capacity: 16 amps

Battery Type: BCI Group U1

Battery Voltage: 12 Volt

Polarity: Negative Ground

Fuses: One 25 amp, one 20 amp; one 15 amp; one 10 amp blade type

Diode: TVS

Operator Controls

Steering and Motion Control:

Note: Motion control levers are adjustable to three heights.

Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.

Steering is controlled by varying the position of the levers relative to each other.

Moving motion control levers outward (in slots) locks the drive system in neutral.

PTO Engagement Switch: Engages electric clutch (to drive belt) which engages mower blades.

Parking Brake Lever: Engages parking brake.

Deck Height Adjustment Pin: Sets cutting height to desired position.

Deck Lift Lever: Foot pedal that raises the deck.

Transport Lock: Automatically latches at the transport position.

Seat

Type: Standard seat with high back, foam padded with spring suspension and armrests.

16

Page 16
Image 16
Exmark 850 Specifications, Model Numbers, Systems, Engine, Safety Interlock System, Fuel System, Electrical System, Seat