Operation
4.Remove the hairpin from the mount pin and pull the mount pin out of the frame mount barrel.
5.Pick up the frame legs and hook the notch onto the lower mount bar (see Figure 11).
6.Lift the hopper assembly and pivot it upward toward the back of the unit (see Figure 12).
and align the holes. Insert the spring clevis pin and rotate it downward to latch it onto the handle link.
Figure 12
1. | Rotate hopper assembly | 5. | Frame mount barrel |
2. | Rear bumper | 6. | Hairpin |
3. | Mount bracket | 7. | Mount pin |
4.Opening
7.Continue to push the hopper assembly forward until it contacts the mount bracket.
8.Adjust the exhaust diverter up or down in the slots so it fits over the muffler.
9.If needed, install washers between the exhaust diverter and the frame to space the guard outward.
10.Install the mount pin into the frame mount barrel. Make sure that it extends into the opening between the rear bumper and the mount bracket (see Figure 12).
11.Align the holes in the mount pin and frame mount barrel and insert the hairpin to lock the hopper assembly into place.
12.Tighten the hardware on the exhaust diverter.
13.If the handle was removed on the LZUVQD11, install the handle assembly to the unit by fastening the bolt and nut as shown in Figure 13. Unlatch the spring clevis pin from the handle link. Rotate the handle link towards the actuation arm bracket
Figure 13
1. | Handle link | 4. | Handle assembly |
2. | Actuation arm bracket | 5. | Nut |
3. | Spring clevis pin | 6. | Bolt |
14.Remove the belt cover on the right side of the deck.
15.Mount the blower on the deck by inserting the mounting pin into the tube welded to the rear corner of the deck (see Figure 14). Pivot the blower until the front pin engages the slot in the deck. Adjust the position of the front pin if necessary to engage the slot. Use the latch to lock the blower in this position. Adjust the tension on the latch to hold the blower up to the deck, yet allow for release by hand.
Figure 14
1. | Slot | 4. | Mounting pin |
2. | Front pin | 5. | Deck tube |
3. | Blower latch |
|
|
|
|
|
|
15
