Maintenance
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
WARNING
While maintenance or adjustments are being made, someone could start the engine. Accidental starting of the engine could seriously injure you or other bystanders.
Remove the key from the ignition switch, engage parking brake, and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).
WARNING
The engine can become very hot. Touching a hot engine can cause severe burns.
Allow the engine to cool completely before service or making repairs around the engine area.
Recommended Maintenance Schedule(s)
Maintenance Service | Maintenance Procedure | ||
Interval | |||
|
| ||
|
| ||
| • Check the blower housing/impeller. | ||
| • | Check door cloth mesh. | |
Before each use or daily | • | Check exhaust diverter. | |
| • Clean muffler and rear frame area. | ||
| • Clean rear screen in the hopper. | ||
|
|
| |
Every 25 hours | • | Lubricate grease fittings. | |
|
|
| |
Every 50 hours | • | Check condition of belt. | |
|
|
| |
Yearly or before storage | • | Clean blower. | |
|
|
| |
Periodic Maintenance
Check Blower
Housing/Impeller
Service Interval: Before each use or daily
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Inspect for wear or damage daily. Replace or repair worn parts as needed
Note: When mowing in areas with sandy soil, use low lift blades on the cutting deck and higher cutting heights to minimize wear on the blower components.
Check Door Cloth Mesh
Service Interval: Before each use or daily
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Inspect the door cloth mesh for wear, tears, or damage.
20
