Operation
Operating Instructions
Handle Adjustment
The height of the handle can be adjusted for comfortable operation. Stand behind the handle to determine the height. To adjust the handle height, position the hardware into one of the three holes in the handle bracket.
Open the Fuel Shut-Off Valve
Rotate the valve 1/4 turn counterclockwise to turn the fuel on (if equipped).
Starting the Engine
1. Connect the wire to the spark plug.
Figure 9
Honda unit
1.Muffler
2.Oil fill/dipstick
3.Fuel tank cap
4.Recoil starter handle (located on handle bar for zone start units)
5.Engine stop switch (if equipped)
6.Air filter
7.Choke (BBC only)
Throttle/Choke (located on handle bar for zone start units)
8.Spark plug
Figure 10
Kawasaki units with large fuel tank shown
1.Muffler
2.Oil fill/dipstick
3.Recoil starter handle (located on handle bar for zone start units)
4.Fuel tank cap (fuel tank varies)
5.Engine stop switch (if equipped)
6.Oil filter (if equipped)
7.Air cleaner
8.Primer bulb
9.Spark plug
2.Open the fuel valve.
3.For ECXKABBC21 Units: Turn the engine stop switch to “” (see Figure 5).
4.For Kawasaki Units: Press the primer bulb two times (see Figure 11).
Figure 11
For ECXHNBBC21 Units: Turn the engine stop switch to “” and pull outward on the choke control.
For ECXHN21 Units: Move the choke/throttle control forward to the choke position.
Note: Do Not use the choke when the engine is warmed up.
15