Operation
Note: Determine the left and right sides of the machine from the normal operating position.
Each time before you mow, ensure that the
Caution
This machine produces sound levels in excess of 85dBA at the operator's ear and can cause hearing loss through extended periods of exposure.
Wear hearing protection when operating this machine.
Controls
The control bar, the throttle control, and the starter handle are on the upper handle as shown in Figure 7.
2
3
1
222
Figure 7
1. Control bar | 3. Starter handle |
2. Throttle
Starting the Engine
1.Connect the wire to the spark plug (Fig. 6).
2.Open the fuel valve by moving the lever to the right (Fig. 8).
1
Figure 8
1. Fuel valve
3.Move the throttle control to the Choke position (Fig. 7).
Note: Do not use the choke when the engine is warm.
4.Hold the control bar to the handle (Fig. 7).
5.Pull the starter handle (Fig. 7) lightly until you feel resistance, then pull it sharply. Allow the rope to return to the handle slowly.
6.When the engine starts, move the throttle control to the Fast position, and set the ground speed control as desired.
Note: If the engine fails to start after three pulls, repeat steps 4 through 6.
Stopping the Engine
Release the control bar. Both the engine and the blade should stop within 3 seconds. If they do not, contact an Authorized Service Dealer.
Note: Close the fuel valve by moving the lever to the left if you will not be starting the engine soon afterward.
9
