Extron electronic 400 user manual Specifications

Specifications

These specifications apply to all models unless otherwise noted.

Video input

Number/type	1 analog RGBHV, RGBS, RGsB
Connectors	1 9-pin male D connector for
	MBC/LBC cable or buffer
Nominal level(s)	Analog	0.3V to 1.45V p-p
Impedance	75 ohms or Hi Z, switchable (set to
	75 ohms if no local monitor is connected)
Horizontal frequency	15 kHz to 150 kHz
	(optimum 15 kHz to 62 kHz)
Vertical frequency	30 Hz to 170 Hz
Return loss	-30dB @ 5 MHz

Video throughput

Gain	Unity (0.7V), 15% with 3dB peaking (0.8V),
	30% with 6dB peaking (0.9V)
Bandwidth	300 MHz (-3dB)

Video output

Number/type/format	1 analog RGBHV, RGBS, RGsB
Connectors	6 BNC female
Nominal level	Analog	0.7V p-p, 0.8V p-p, or
		0.9V p-p (internal jumper-
		selectable) w/peaking
Impedance	75 ohms
Return loss	-30dB @ 5 MHz

Sync

Input type	Autodetect RGBHV, RGBS, RGsB (accepts
	RGsB but does not strip from video)
Output type	RGBHV	at all times
	RGBS	at all times
	RGsB	only when input is RGsB
Input level	2.0V to 5.5V p-p with +0.2VDC offset max.
Output level	4.0V to 5.0V p-p
Input impedance	10 kohms
Output impedance	75 ohms
Max propagation delay	50 nS
Max rise/fall time	2.5 nS
Polarity	Positive or negative

Audio input — RGB 404

Number/type	2 stereo, unbalanced; 1.0Vrms (+4dBu),
	20 Hz to 20 kHz
Connectors	Ch. 1	2 RCA female jacks
	Ch. 2	3.5 mm stereo female jack
		(2 channel), unbalanced;
		tip (L), ring (R), sleeve (gnd)
Impedance	10 kohms, DC coupled
Minimum level	100mV
Maximum level	+8.5dBu

Audio input — RGB 406 and RGB 408

Number/type	1 stereo, unbalanced; 1.0Vrms (+4dBu),
	20 Hz to 20 kHz
Connectors	3.5 mm stereo female jack (2 channel),
	unbalanced; tip (L), ring (R), sleeve (gnd)
Impedance	10 kohms, DC coupled
Minimum level	100mV
Maximum level	+8.5dBu

Audio throughput — RGB 404 (channels 1 and 2), RGB 406 and RGB 408

Gain	Unbalanced 0dB, balanced +6dB
Response	±0.5dB @ 20 Hz to 20 kHz
THD + Noise	0.03% @1 kHz, 0.3% @ 20 kHz
	at rated maximum output drive
S/N	>90dB, output 14dBu, balanced
Stereo channel separation	>95dB @ 1 kHz to 20 kHz

Audio output — RGB 404 (channels 1 and 2)

Number/type	2 buffered, stereo (2 channel),
	balanced/unbalanced
Connectors	3.5 mm captive screw terminal,
	5 conductor
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1dB channel to channel
Drive (600 ohm)	+14dBu, balanced at stated %THD+N

Audio output — RGB 406 and RGB 408

Number/type	1 buffered, stereo (2 channel),
	balanced/unbalanced
Connectors	3.5 mm captive screw terminal, 5 conductor

A-2 RGB 400 Series • Specifications RGB 400 Series • Specifications A-3