Extron electronic 400 user manual Templates, RGB 406 Cut-out Template, RGB 404 Cut-out Template

Templates

All the templates in this section are actual size. Also, they all include the recommended 0.1” (0.25 cm) clearance on all sides of the electrical wall box to allow room for the raised areas surrounding the knockouts.

The dashed line in each template indicates the cut-out area for installing a wall box. If you plan to install the interface without a wall box, use the smaller cut-out area indicated by the dotted lines.

RGB 406 Cut-out Template

Use this template as a guide for cutting a hole in a wall or furniture for the 2-gang size electrical box in order to install an RGB 406.

The light gray area represents the layout of the electrical box (3.75"H x 3.75"W) against the rear of the RGB 406 front panel. To install the interface without a wall box, use the cut-out area (3.00"H) indicated by the dotted line. The dashed line indicates the cut-out area (3.95"H x 3.95"W) for installing the electrical wall box.

RGB 404 Cut-out Template

Use this template for cutting a hole in a wall or furniture for the 3-gang size electrical box for an RGB 404.

The light gray area represents the layout of the electrical box (3.75"H x 5.60"W) against the rear of the RGB 404 front panel.	To install the interface without a wall box, use the cut-out area (3.00"H) indicated by the dotted line. dashed line indicates the cut-out area	(3.95"H x 5.80"W) for installing the electrical wall box.
	The

B-2 RGB 400 Series • Templates RGB 400 Series • Templates B-3