Installation
DISTRIBUTION
AMPLIFIER
VersaTools Rack Shelf | DISTRIB | AMPLIFIER |
|
| UTION |
|
|
1/4 Rack Width False |
|
|
|
Front Face Plate |
|
|
|
| DISTRIBUTION | AMPLIFIER | |
|
|
| |
Use 2 mounting holes | (2) | ||
on opposite corners. |
| Extron | |
|
|
| |
BBG 6 A
Black Burst
Color Bar
Audio Generator
Figure 1 — Rack mounting the BBG 6 A on a
VersaTools shelf
1. | If rubber feet were previously installed on the bottom of |
| the unit, remove them. |
2. | Mount the unit on the rack shelf, using two |
| screws in opposite (diagonal) corners to secure the |
| BBG 6 A to the shelf. |
3. | Install blank panel(s) or other unit(s) to the rack shelf. |
4.Insert the shelf into the rack, aligning the holes in the shelf with those of the rack.
5.Secure the shelf to the rack using the supplied machine screws. The VersaTools shelf can be mounted in the front or in the rear of the rack.
BBG 6 A • Installation
DISTRIBUTION
AMPLIFIER
DISTRIBUTION
A
MPLIFIER
DISTRIBUTION
A
MPLIFIER
MDA
DISTRIBUTIONSERIA ES
MPLIFIER
Figure 2 — Mounting the BBG 6 A on a standard shelf
Furniture or projector mounting
Furniture mount or projector mount the unit using the optional mounting kit (part
1. | If rubber feet were previously installed on the bottom of |
| the unit, remove them. |
2. | Attach the mounting brackets to the BBG 6 A with the |
| machine screws provided (figure 3). |
3. | For furniture mounting, hold the unit with the attached |
| brackets against the underside of the table or other |
| furniture. Mark the location of the screw holes of the |
| bracket on the mounting surface. |
| Projector |
| Mounting |
| Bracket |
| Mounting |
| Bolt |
| |
| Mounting |
| Projector |
| Mounting |
| DIST |
| RIB |
| UTIO |
| NA |
| MPLIFI |
| ER |
Projector
Figure 3 — Desk and projector mounting the BBG 6 A
BBG 6 A • Installation |
