To use any menu:
1.Press the Menu button to access the main menu. The menu opens with the Quick Setup menu displayed.
2.Press the and buttons repeatedly to cycle through to the desired submenu (each button press outlines the next option).
3.Press the Enter button to access the desired submenu. The first option is outlined in yellow.
4.Press the and buttons to cycle through the options of the selected submenu until the desired item is outlined.
5.Press the Enter button to select the outlined option (the selected option is highlighted).
6.Press the and buttons to adjust the values within the option. For the options on the Picture Controls submenu, press the right or left arrow button to select the
7.Press Enter to confirm your new values. The yellow highlighting is replaced by the yellow outline on the submenu screen.
8.Press the and buttons to move to another submenu option or press the Menu button to exit the submenu. To exit the menu system, press the Menu button twice.
Setting Up the DSC 3G-HD A Using the OSD Menu
The Quick Setup submenu is displayed when the OSD opens. This submenu contains options from other submenus that you are most likely to need when configuring the DSC for the first time. Use the Quick Setup submenu to perform a basic system setup and get started quickly using the DSC. Select the following options from it as needed:
zz
zz Output Resolution — Lets you select the resolution and refresh rate for the current output from a range of available
buttons to cycle through the available rates.
zz Auto Memory — Sets the DSC to automatically save the current input configuration and picture control values according to the most recent configuration for each different rate. After selecting Auto Memory, press any arrow button to toggle Auto Memories on and off.
zz Aspect Ratio — Lets you specify how much of the display the image fills. The
zz Input Audio Format — Lets you select the format of the audio to embed in the output. After selecting Input Audio Format, press any arrow button to cycle through the options: None (mute the audio), Analog (embed analog audio onto the HDMI output), 2CH Digital (select one channel pair), 8CH Digital (use first four pairs), and SDI Audio Decode (select a pair from a group.)
zz Test Pattern — Lets you select from seven test patterns to aid in setting up the DSC and the output display.
Output Scaler Rates
Output rates can be set using the OSD menu or SIS commands. The table at right gives the rates and their SIS variables (see the SIS table on page 4).
Output Rate Reset
If an image cannot be displayed due to an incompatible output rate, you can reset the output rate as follows:
With the OSD closed, press and hold the
button for approximately 5 seconds to toggle between 1024x768 @ 60 Hz and 720p @ 60 Hz.
SIS Variables for DSC
Resolution | 23.98 Hz | 24 Hz | 25 Hz | 29.97 Hz | 30 Hz | 50 Hz | 59.94 Hz | 60 Hz |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
640x480 |
|
|
|
|
|
|
| 11 |
|
|
|
|
|
|
|
|
|
800x600 |
|
|
|
|
|
|
| 14 |
|
|
|
|
|
|
|
|
|
1024x768 |
|
|
|
|
|
|
| 20 |
|
|
|
|
|
|
|
|
|
1280x768 |
|
|
|
|
|
|
| 29 |
|
|
|
|
|
|
|
|
|
1280x800 |
|
|
|
|
|
|
| 32 |
|
|
|
|
|
|
|
|
|
1280x1024 |
|
|
|
|
|
|
| 35 |
|
|
|
|
|
|
|
|
|
1360x768 |
|
|
|
|
|
|
| 41 |
|
|
|
|
|
|
|
|
|
1366x768 |
|
|
|
|
|
|
| 47 |
|
|
|
|
|
|
|
|
|
1440x900 |
|
|
|
|
|
|
| 53 |
1400x1050 |
|
|
|
|
|
|
| 56 |
|
|
|
|
|
|
|
|
|
1600x900 |
|
|
|
|
|
|
| 58 |
|
|
|
|
|
|
|
|
|
1680x1050 |
|
|
|
|
|
|
| 60 |
|
|
|
|
|
|
|
|
|
1600x1200 |
|
|
|
|
|
|
| 62 |
|
|
|
|
|
|
|
|
|
1920x1200 |
|
|
|
|
|
|
| 64 |
|
|
|
|
|
|
|
|
|
480p |
|
|
|
|
|
| 65 | 66 |
|
|
|
|
|
|
|
|
|
576p |
|
|
|
|
| 67 |
|
|
|
|
|
|
|
|
|
|
|
720p |
|
| 68 | 69 | 70 | 71 | 72 | 73* |
|
|
|
|
|
|
|
|
|
1080i |
|
|
|
|
| 74 | 75 | 76 |
|
|
|
|
|
|
|
|
|
1080p | 77 | 78 | 79 | 80 | 81 | 82 | 83 | 84 |
|
|
|
|
|
|
|
|
|
2048x1080 (2k) | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 |
|
|
|
|
|
|
|
|
|
*Default output resolution
3
