Extron electronic user manual Rack mounting procedure, Rack mounting the DVI DA2 or DVI DA4

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

Rack mounting procedure

These distribution amplifiers can be mounted on any of the following rack shelves:

•RSF 123 (part # 60-190-20) 1U 3.5" VersaTools® rack shelf kit

•RSB 123 (part # 60-604-21) 1U 3.5" VersaTools basic rack shelf

•RSU 126 (part # 60-190-10) 1U 6" rack shelf kit

•RSB 126 (part # 60-604-11) 1U 6" basic rack shelf

•RSU 129 (part # 60-190-01) 1U 9.5" rack shelf kit

•RSB 129 (part # 60-604-02) 1U 9.5" basic rack shelf

1U Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

Front false faceplate uses 2 screws.

Use 2 mounting holes on opposite corners.

(2)4-40 x 3/16" Screws

Rack mounting the DVI DA2 or DVI DA4

To mount the distribution amplifier on a rack shelf:

1. If necessary, remove rubber feet from the bottom of the unit.

2. Align two diagonally opposite mounting holes on the unit with two pre-drilled holes in the shelf. Use the two provided 4-40 x 3/16" screws to secure the unit on the shelf.

3. Install other unit(s) or false faceplate(s) on the rack shelf.

DVI DA2 and DVI DA4 • Installation and Operation 2-3