Extron electronic ADA 2/GLI 350xi user manual Installation, cont’d, Rack mounting

Installation, cont’d

Rack mounting

The ground loop isolators can be mounted in a rack shelf using the optional RSU 129 1U 9.5" deep universal rack shelf kit (Extron part #60-190-01) or the RSU 126 1U 6" deep universal rack shelf kit (Extron part #60-190-10), as follows.

6" Deep Rack Shelf

1.	If feet were installed on the bottom of the GLI, remove
	them.
2.	Place the GLI on one half of the 1U (one unit high, 19"
	wide) rack shelf. Align the front of the GLI with the front
	of the shelf, and align the threaded holes on the bottom of
	the GLI with the holes in the rack shelf.
3.	Attach the GLI to the rack shelf with the two provided
	4-40 x 3/16” machine screws. Insert the screws from
	the underside of the shelf, and securely fasten them into
	diagonally opposite corners.
	See the following illustrations of rack mounting using
	Extron's RSU 129 universal 9.5 " deep and RSU 126

1/2 Rack Width False Front

Face Plate

1/4 Rack Width False Front

Face Plate

Use 2 mounting holes		ES
	G GLI35
	ROUND	0xi
		LOOP SERI
on opposite corners.		ISOLATOR

(2)4-40 x 3/16" Screws

universal 6" deep rack shelves.

9.5" Deep Universal Rack Shelf

1/2 Rack Width Front False

Faceplate

Rack mounting of the GLI in a 6" deep rack shelf

4.	Attach the false front panels (provided with rack shelf kit
	part #60-190-01 or 60-190-10) to the unoccupied side of the
	rack (as shown above), as desired.

Both front false faceplates use 2 screws.

GLI

GROUND350xiS

LOOP ERIES

ISOLATOR

1/4 Rack Width Front False

Faceplate

(2) 4-40 x 3/16" Screws

Use 2 mounting holes on opposite corners.

5.	Attach the rack shelf to the rack using four 10-32 x ¾” bolts
	(provided). Insert the bolts through #10 beveled washers,
	then through the holes in the rack, as shown above.

Rack mounting of the GLI in a 9.5" deep rack shelf

2-4 GLI 350xi & ADA 2/GLI 350xi • Installation GLI 350xi & ADA 2/GLI 350xi • Installation 2-5