IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 40
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Auto-Image
Enable X!*1A ImgX!*1]Activate Auto-Image for input X!.
Disable X!*0A ImgX!*0]Turn off Auto-Image for input X!.
View X!AX(] View the Auto-Image setting for
input X!.
Execute AImg0]Execute an Auto-Image for the
current input (follows the aspect
ratio of the current input).
Execute and fill 1*A Img1]Execute an Auto-Image and fill the
entire output.
Execute and follow 2*A Img2]Execute an Auto-Image and
maintain the aspect ratio of the
current input.
Auto-Image threshold value (luminosity value which the scaler defines as active video for Auto-Image)
Set value EX2(ALVL}Alvl X2(] Set the global Auto-Image
luminosity to X2(.
View EALVL} X2(] View the global Auto-Image
luminosity setting.
Horizontal start
Specify a value EX$ HSRT}HsrtX!*X$] Set the horizontal start position.
Increment value E+HSRT}HsrtX!*X$] Increase the horizontal start
position.
Decrement value E-HSRT}HsrtX!*X$] Decrease the horizontal start
position.
View EHSRT} X$] View the horizontal start position.
Vertical start
Specify a value EX$ VSRT}VsrtX!*X$] Set the vertical start position.
Increment value E+VSRT}VsrtX!*X$] Increase the vertical start position.
Decrement value E-VSRT}VsrtX!*X$] Decrease the vertical start
position.
View EVSRT} X$] View the vertical start position.
NOTES:
X! = Input selection 1-6 (IN1606) or 1-8 (IN1608 models)
X$ = H/V start 0-255
X( = Enable or disable 0 = off or disabled
1 = on or enabled
X2( = Auto-Image threshold value 0-100 (where 0 = black and 100 = white; 25 = default)