IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 45
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Audio Configuration Commands
Audio input format
NOTE: For audio input format details, see Audio format on page 75.
Set audio input format EIX!*X3%AFMT}AfmtI X!*X3%] Set the audio format of input X! to
X3%.
View audio input format EIX!AFMT} X3%] View the audio input format of input
X!.
Audio level control
Set gain or trim EGX5&*X5*AU} X5*]
DsGX5&*X5*]
Set the gain of X5& to X5*.
Verbose mode 2 or 3.
View gain or trim EGX5&AU} X5*]
DsGX5&*X5*]
View the gain or trim of X5&.
Verbose mode 2 or 3.
Audio mute
Mute audio EMX5&*1AU}DsMX5& *1]Mute control X5&.
Unmute audio EMX5&*0AU}DsMX5& *0]Unmute control X5&.
View audio mute status EMX5&AU } X(]
DsMX5&*X(]
View the mute status of control X5&.
Verbose mode 2 or 3.
NOTES:
X! = Input selection 1-6 (IN1606) or 1-8 (IN1608 models)
X( = Enable or disable 0 = off or disabled
1 = on or enabled
X3% = Audio input format 0 = none (input muted)
1 = analog (default for inputs 1 and 2)
2 = LPCM-2Ch (default for inputs 3-6)
3 = Multi-Ch
4 = LPCM-2Ch auto
5 = Multi-Ch auto
X5& = Gain or mute control 40100 = mic 1 (mix volume only)
40000 = mic 1 (mute only)
40101 = mic 2 (mix volume only)
40001 = mic 2 (mute only)
60000 = output 1
60002 = output 2
60004 = left variable output
60005 = right variable output
60006 = left digital output
60007 = right digital output
60008 = left amplified output (IN1608 SA only) or
amplified output (IN1608 MA only)
60009 = right amplified output (IN1608 SA only)
X5* = Gain or trim level -1000 to 0 = dB value multiplied by ten, in 0.1 dB increments,
to raise or lower a group fader (for example, -100 = -10 dB)
0 = default