IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 48
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Advanced Configuration Commands
Test pattern
Set pattern EX2)TEST}Test X2)] Set test pattern X2).
View test pattern ETEST} X2)] View the current test pattern.
Freeze
Enable 1F Frz1]Freeze the current input.
Disable 0F Frz0]Unfreeze the current input.
View FX(] View the freeze setting.
Video switch effect
Cut E0SWEF}Swef0]Set the switch effect to cut.
Fade through black E1SWEF}Swef1]Set the switch effect to fade
through black (default).
View setting ESWEF} X3!] View the switch effect setting.
Input aspect ratio (per input)
Set for fill EX!*1ASPR}Aspr X!*1]Fill the entire output.
Set to follow EX!*2ASPR}AsprX!*2]Maintain the input aspect ratio.
View aspect setting EX!ASPR} X2^ ] View the aspect ratio setting.
Front panel lockout mode (executive mode)
Enable mode 1 1X Exe1]Lock the entire front panel.
Enable mode 2 2X Exe2]Limit front panel control to input
switching and volume control only.
Disable 0X Exe0]Unlock the front panel.
View status XX2$] View the lock mode.
NOTES:
X! = Input selection 1-6 (IN1606) or 1-8 (IN1608 models)
X( = Enabled or disabled 0 = off or disable
1 = on or enable
X2) = Test patterns 0 = none (default)
1 = crop
2 = alternating pixels
3 = color bars
4 = grayscale
5 = blue mode
6 = audio test pattern (pink noise)
X2$ = Executive mode status 0 = off or disabled (default)
1 = mode 1 (complete front panel lockout)
2 = mode 2 (input selection and volume control only)
X2^ = Aspect ratio setting 1 = fill (default)
2 = follow
X3! = Video switching effect 0 = cut
1 = fade through black (default)