IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control 41
Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Pixel phase (available only for RGB and YUV-HD input signals)
Specify a value EX%PHAS}Phas X!*X%] Set the pixel phase to X% on the current
input.
Increment value E+PHAS}PhasX!*X%] Increase the pixel phase on the current input.
Decrement value E-PHAS}PhasX!*X%] Decrease the pixel phase on the current
input.
View EPHAS} X%] View the pixel phase setting on the current
input.
Total pixels (available only for RGB and YUV-HD input signals)
Specify a value EX^TPIX}Tpix X!*X^] Set the total pixels to X^ on the current input.
Increment value E+TPIX}TpixX!*X^] Increase the total pixels on the current input.
Decrement value E-TPIX}TpixX!*X^] Decrease the total pixels on the current input.
View ETPIX} X^] View the total pixel setting on the current
input.
Active pixels
Specify a value EX&APIX}Apix X!*X&] Set the active pixels to X& on the current
input.
Increment value E+APIX}ApixX!*X&] Increase the active pixels on the current
input.
Decrement value E-APIX}ApixX!*X&] Decrease the active pixels on the current
input.
View EAPIX} X&] View the active pixel setting on the current
input.
Active lines
Specify a value EX*ALIN}Alin X!*X*] Set the active lines to X* on the current
input.
Increment value E+ALIN}AlinX!*X*] Increase the active lines on the current input.
Decrement value E-ALIN}AlinX!*X*] Decrease the active lines on the current
input.
View EALIN} X*] View the active lines setting on the current
input.
3:2, 2:2, 24:1 Film mode detect
Auto EX!*1FILM}Film X!*X1@] Set film mode detection to automatic
(default).
Off EX!*0FILM}Film X!*X1@] Disable film mode detection.
View setting EX!FILM} X1@ ] View the current film mode setting.
NOTES:
X! = Input selection 1-6 (IN1606) or 1-8 (IN1608 models)
X% = Pixel phase 0-63 (31 = default)
X^ = Total pixels ±512 of the default value
X& = Active pixels ±512 of the default value
X* = Active lines ±256 of the default value
X1@ = Film detect mode 0 = disabled
1 = auto (default)