Extron AAP 100 and MAAP 100 Installation Guide

The following procedure is for mounting the AAP 100 and MAAP 100 panels on hard surfaces (plywood, hardwood, etc.). For soft surfaces (particle board, drywall, etc.), additional hardware such as anchors may be required (not provided).

1.Make a copy of the appropriate full size rough-in template. Cut out the center portion of the template up to the dashed guidelines.

CFor accurate sizing, copy the template at exactly 100%.

2.Place the template in the desired location and mark the guidelines for the opening on the surface.

3.Carefully cut away the material inside the guidelines. Check the opening size by placing the panel against the opening.

4.Cable the AAP(s)/MAAP(s) and install them on the panel.

5.Place the panel against the surface and mark the locations of the two wall mounting holes on the surface.

6.Remove the panel and drill 1/4" deep pilot holes (half the width of the shaft of the screw) at the marked locations. Replace the panel.

7.Use two 1/2" (1.3 cm) long, #6 flat headed wood screws (provided) to fasten the panel directly onto the surface. Hand tighten the screws.

Product Dimensions

0.100

1.750

2 x 0.875

Installation Templates

The dashed line indicates the recommended cut-out area for the installation surface. 1.5" H x 2.25" W

(3.8 cm H x 5.7 cm W)

Template for the MAAP 100

The solid, outer line represents the outside edge of the panel. 1.75" H x 3.25" W

(4.45 cm H x 8.25 cm W)

The solid, outer line represents the outside edge of the panel. 1.75" H x 4.5" W

(4.45 cm H x 11.4 cm W)

0.100

0.000

0.000

0.250

1.750

4.250

4.500

The dashed line indicates the

 

recommended cut-out area

 

for the installation surface.

Template for

1.5" H x 3.5" W

(3.8 cm H x 8.9 cm W)

the AAP 100

 

2 x 0.875

0.000

0.000

0.250

3.000

3.250

68-837-01 Rev. B

08 08

Extron USA - West

Extron USA - East

Extron Europe

Extron Asia

Extron Japan

Extron China

Extron Dubai

Headquarters

+800.633.9876

+800.3987.6673

+800.7339.8766

+81.3.3511.7655

+400.883.1568

+971.4.2991800

 

+800.633.9876

Inside USA / Canada Only

Inside Europe Only

Inside Asia Only

+81.3.3511.7656 FAX

Inside China Only

+971.4.2991880 FAX

Inside USA / Canada Only

+1.919.863.1794

+31.33.453.4040

+65.6383.4400

 

+86.21.3760.1568

 

 

 

 

+1.714.491.1500

+1.919.863.1797 FAX

+31.33.453.4050 FAX

+65.6383.4664 FAX

 

+86.21.3760.1566 FAX

 

+1.714.491.1517 FAX

© 2008

 

 

 

 

 

 

Extron Electronics. All rights reserved.

 

Page 1
Image 1
Extron electronic AAP 100 MD dimensions Installation Templates, Extron AAP 100 and Maap 100 Installation Guide, Aap

AAP 100 MD, MAAP100 specifications

Extron Electronics has made significant strides in the world of audiovisual solutions, and two of its prominent products are the MAAP 100 and AAP 100 MD. These devices are part of Extron's commitment to providing high-quality signal distribution and control solutions for various applications, including education, corporate environments, and other professional settings.

The MAAP 100 is designed as an advanced audio amplifier, emphasizing power and clarity. It features a compact and rack-mountable design, making it suitable for a range of installations. One of the standout characteristics of the MAAP 100 is its ability to deliver clean and precise audio without distortion, even at maximum levels. The device employs Class D amplification technology, known for its efficiency and thermal management. This means that the amplifier can provide high output power while generating less heat compared to traditional amplification methods.

The MAAP 100's main features include built-in Equalization (EQ) settings, allowing users to fine-tune audio output to suit specific environments and preferences. Furthermore, it incorporates advanced protection circuitry to safeguard against overloads and short circuits, ensuring both reliability and longevity. The device also supports a wide range of audio input formats, including analog and digital signals, enhancing its versatility in different system configurations.

On the other hand, the AAP 100 MD is an advanced audio processor that focuses on providing comprehensive control over audio signals. It features multiple input and output options, facilitating seamless integration with various audio and video systems. The AAP 100 MD incorporates sophisticated audio processing algorithms that enhance audio fidelity and ensure consistent performance across multiple sources.

A unique characteristic of the AAP 100 MD is its ability to function as a matrix switcher. This feature allows users to route audio signals from multiple sources to various outputs, providing greater flexibility in audio management. Additionally, the device includes built-in microphone preamps, enabling direct connection with microphones for applications such as presentations or conferences.

Both the MAAP 100 and AAP 100 MD are equipped with Extron’s proprietary technologies, ensuring seamless interoperability with other Extron products and third-party devices. Their user-friendly interfaces further simplify operation, making them suitable for users of any skill level.

In summary, the Extron MAAP 100 and AAP 100 MD are exemplary products that showcase the cutting-edge capabilities of Extron Electronics in the realm of audio solutions. Their advanced features and technologies make them indispensable tools for professionals seeking reliable and high-performance audio systems in a variety of applications.