AllerAir 600 DX manual INSTALLING FILTER ASSEMBLY- 600 D, DX, Step

Models: 600 D 600 DX

1 2
Download 2 pages 62.52 Kb
Page 1
Image 1
INSTALLING FILTER ASSEMBLY- 600 D, DX

INSTALLING FILTER ASSEMBLY- 600 D, DX

The AllerAir 600 models ship with their large carbon filters in a separate box.

This is done to safeguard your unit during shipping. To insert the filter, refer to the diagram below.

INSTALLING FILTER ASSEMBLY- 600 Models (except D and DX)

The AllerAir 600 models ship with their large carbon filters in a separate box.

This is done to safeguard your unit during shipping. To insert the filter, refer to the diagram below.

Step 1

 

Step 2

 

Step 3

Turn Power Off and

 

With a #2 Philips screw driver,

 

Gently grasp wheels.

unplug receptacle.

 

 

 

 

remove the four screws from the

 

Remove base by gently pulling on

 

 

 

Lay unit upside down.

 

bottom of the unit.

 

the wheels.

 

 

 

 

 

Step 4

 

Step 5

 

Step 6

Remove only one of the white, felt,

 

Insert the carbon filter (either a

 

donut-shaped gaskets from the

 

Model 600 D Carbon or a Model 600

 

Replace the gasket that had been

inside of the purifier body.

 

DX Carbon) into the unit.

 

removed in STEP 4.

 

 

 

 

 

Step 7

 

 

 

Step 9

Place lid back to its proper position

 

Step 8

 

by aligning the arrow with the rear

 

 

Turn the unit back onto its wheels.

seam.

 

Replace the four screws

 

It is now ready for immediate use.

 

 

 

 

 

Step 1

Turn Power Off and unplug receptacle.

Lay unit upside down.

Step 4

Remove base by gently pulling on the wheels.

Step 7

Replace filters with new ones then reassemble by inserting the Carbon filter first then the HEPA filter.

Step 2

With a #2 Philips screw driver, remove the four screws from the bottom of the unit.

Step 5

First remove the HEPA filter by placing thumbs on the inner side of the filter.

Then pull up gently until totally out.

Step 8

Place lid back to its proper position by aligning the arrow with the rear seam.

Step 3

Gently grasp wheels.

Step 6

Than remove the Carbon filter by placing thumbs on the inner side of the filter.

Then pull up gently until totally out.

Step 9

With a screw driver, place 4 screws back into their positions.

Gently return the unit into upright position.

AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-3939 www.allerair.com

AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-3939 www.allerair.com

Page 1
Image 1
AllerAir 600 DX manual INSTALLING FILTER ASSEMBLY- 600 D, DX, Step