CAST IRON STOVE AND BURNER SYSTEM
PRE-INSTALLATION PREPARATION
WARNING: A qualified ser- vice person must install stove and burner system. Follow all lo- cal codes.
CAUTION: This stove creates warm air currents. These currents move heat to wall surfaces next to stove. Installing stove next to vinyl or cloth wall coverings or operating stove where impurities (such as tobacco smoke, aro- matic candles, cleaning fluids,
Corner Installation
On Wall with Vertical
Termination Through Ceiling
Figure 2 - Common Freestanding Stove Locations
Ceiling
oil or kerosene lamps, etc.) in the air exist, may discolor walls.
LOCATION AND SPACE REQUIREMENTS
Determine the safest and most efficient loca- tion for your FMI
42"
36"
from
Front
4"
from
Back
Wall
4" |
6" |
Front |
for your stove.
When deciding the location of your stove, follow these rules:
1.Do not connect this stove and burner system to a chimney flue serving a separate
2.Due to high temperatures, do not lo- cate this stove in high traffic areas or near furniture or draperies.
3.Proper clearances must be maintained, see Figures 3 and 4.
4.This stove is a freestanding unit de- signed to set directly on the floor. If your stove is to be installed directly on carpeting, vinyl tile, or any combustible material other than wood, it must be installed on a metal or wood panel ex- tending the full width and depth of the stove. See Figure 5.
Floor
29"
Figure 3 - Minimum Clearances for Standard Installation
26"
Front
19 1/2"
4" 4"
Figure 4 - Minimum Clearance for Corner | Figure 5 - Freestanding Stove with Burner |
Installation | System Bottom Dimensions |
For more information, visit www.desatech.com | 4 | 107600 |