OWNER’S MANUAL
STOVE AND
Continued
4.Check all joints of gas supply piping system. Apply commercial leak test so- lution to all gas joints. Bubbles forming show a leak. Correct all leaks at once.
5.Reconnect burner system and equip- ment shutoff valve to gas supply. Check reconnected fittings for leaks.
Test Pressures Equal To or Less Than 1/2 PSIG (3.5 kPa)
1.Close equipment shutoff valve (see Figure 33).
2.Pressurize supply piping system by ei- ther opening propane/LP supply tank valve for propane/LP gas burner sys- tem or opening main gas valve located on or near gas meter for natural gas burner system, or using compressed air.
3.Check all joints from propane/LP sup- ply tank or gas meter to equipment shutoff valve (see Figure 34 for pro- pane/LP or Figure 35 for natural). Ap- ply commercial leak test solution to all gas joints. Bubbles forming show a leak. Correct all leaks at once.
Pressure Testing Burner System Gas Connections
1.Open equipment shutoff valve (see Fig- ure 33).
2.Open propane/LP supply tank valve for propane/LP burner system or main gas valve located on or near gas meter for natural gas burner system.
3.Make sure control knob of burner sys- tem is in the OFF position.
4.Check all joints from equipment shutoff valve to thermostat gas valve (see Fig- ure 34 for propane/LP or Figure 35 for natural). Apply commercial leak test so- lution to all gas joints. Bubbles forming show a leak. Correct all leaks at once.
5.Light burner system (see Lighting In- structions, page 19). Check all other in- ternal joints for leaks.
6.Turn off burner system (see To Turn Off Gas to Appliance, page 19).
Open
Equipment
Shutoff
Valve
Closed
Figure 33 - Equipment Shutoff Valve
Equipment | 100 lb. (Min.) |
Shutoff | Propane/LP |
Valve | Supply Tank |
Gas Valve |
|
Figure 34 - Checking Gas Joints for Propane/LP Gas Burner System
Equipment |
Shutoff Valve |
Gas Meter |
Gas Valve |
Figure 35 - Checking Gas Joints for Natural Gas Burner System
Continued
107600 | 15 | For more information, visit www.desatech.com |
