Modular & Expandable Matrix Switchers
Matrix 12800 Series
SPECIFICATIONS
Video — wideband / video BMEs
Routing | 32 x 16 or larger matrix up to 128 x 128, depending on the configuration |
Gain | Unity |
Bandwidth |
|
Wideband models | 375 MHz |
| 0 MHz to 10 MHz: no more than +0.1 dB to |
| 0 MHz to 130 MHz: no more than +4 dB to |
Video models | 150 MHz |
| 0 MHz to 10 MHz: no more than +0.1 dB to |
| 0 MHz to 30 MHz: no more than +0.5 dB to |
Phase between I/Os | <1.28º at 3.58 MHz |
Differential phase error | 0.1%, 3.58 to 4.43 MHz |
Differential gain error | 0.1º, 3.58 to 4.43 MHz |
Max. propagation of delay | 5 ns typical (±1 ns) |
Crosstalk | |
Switching speed | 200 ns (max.) |
Video input — wideband / video BMEs | |
Number / Signal type |
|
Wideband models | Up to 128 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, |
| component video, |
Video models | Up to 128 (usable quantity varies with configuration) component video, |
| |
Connectors | 128 BNC female (usable quantity varies with model) |
Nominal levels | 1 |
| 0.7 |
| 0.3 |
Minimum / Maximum levels. . . Analog: 0.5 V to 1.5
Impedance. . . . . . . . . . . . . . . . . . . . . . . . 75 ohms
Return loss.. . . . . . . . . . . . . . . . . . . . . . .
Video output — wideband / video BMEs
Number / Signal type. . . . . . . . . . . Up to 128 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, component video,
Connectors.. . . . . . . . . . . . . . . . . . . . . . . 128 BNC female (usable quantity varies with model)
Nominal levels.. . . . . . . . . . . . . . . . . . . 1
0.7
0.3
Maximum level.. . . . . . . . . . . . . . . . . . 2
Impedance. . . . . . . . . . . . . . . . . . . . . . . . 75 ohms
Return loss.. . . . . . . . . . . . . . . . . . . . . . .
DC offset.. . . . . . . . . . . . . . . . . . . . . . . . . . ±10 mV typical with input at 0 offset
Switching type. . . . . . . . . . . . . . . . . . .
Slew rate. . . . . . . . . . . . . . . . . . . . . . . . . . >200 V/ms
Sync — sync BME
Input and output types | Software configurable for RGBHV or RGBS |
Sync connectors | Up to 128 BNC female (usable quantity varies with configuration) |
Input level | 0.5 V to 5 |
Output level | 5 |
Gain | AGC to TTL: 4.0 V to 5.0 |
Input impedance | Inputs 1 - 32: 510 ohms or 75 ohms, switchable |
| Inputs 33 - 128: 510 ohms |
Output impedance | 75 ohms |
Horizontal frequency | 15 kHz to 150 kHz |
Vertical frequency | 30 Hz to 150 Hz |
Polarity | Positive or negative (follows input) |
Audio — audio BME
Routing. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 x 16 up to 128 x 128 mono or stereo matrix (in increments of 16), balanced/unbalanced
Gain (selectable per output).. . . . . Unbalanced output:0dB (as shipped), or
Frequency response.. . . . . . . . . . . . 20 Hz to 20 kHz, ±0.05 dB
THD + Noise. . . . . . . . . . . . . . . . . . . . . . 0.03% @ 20 Hz to 20 kHz, +15 dBu input, +21 dBu output S/N.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >85 dB, balanced, at rated maximum output
Crosstalk. . . . . . . . . . . . . . . . . . . . . . . . . .
CMRR.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >+75 dB, 20 Hz to 20 kHz
Audio input — audio BME
Number / Signal type | 16 to 128 (in increments of 16) mono or stereo, balanced/unbalanced |
Connectors | (16 to 128) 3.5 mm captive screw connectors, 5 pole |
Impedance | >10k ohms unbalanced/balanced, DC coupled |
Nominal level | +4 dBu (1.23V), 0 dBu (0.775 V), |
Maximum level | +21.5 dBu, (balanced or unbalanced) at 1%THD+N |
Input gain adjustment |
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — audio BME
Number / Signal type. . . . . . . . . . . 16 up to 128 (in increments of 16) mono or stereo, balanced/unbalanced Connectors.. . . . . . . . . . . . . . . . . . . . . . . (16 to 128) 3.5 mm captive screw connectors, 5 pole
(quantity varies with configuration)
Impedance. . . . . . . . . . . . . . . . . . . . . . . . 50 ohms unbalanced, 100 ohms balanced Gain error.. . . . . . . . . . . . . . . . . . . . . . . . . ±0.1 dB channel to channel
Maximum level
Control / remote — switcher
Serial control port | ||
Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | |
Serial control |
|
|
pin configurations | 2 | = TX, 3 = RX, 5 = GND |
Ethernet control port | 1 | |
Ethernet data rate | ||
Ethernet protocol | ARP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP | |
System intercommunications. 2 | ||
Remote keypad control | (2) 5 mm, | |
Program control | Extron’s control/configuration program for Windows® | |
| Extron’s Simple Instruction Set (SIS™) | |
| Microsoft® Internet Explorer, Netscape® Navigator®, Telnet |
General
Power*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Matrix 12800 sync: 100 watts at 115 VAC, 60 Hz
Matrix 12800 audio: 300 watts at 115 VAC, 60 Hz
* A redundant power supply is available.
Temperature / Humidity | Storage: |
| Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Rack mount | Yes |
Enclosure type | Metal |
Enclosure dimensions | 17.5" H x 17.0" W x 16.0" D (10U high, full rack width) |
| 44.4 cm H x 43.2 cm W x 40.6 cm D |
| (Depth excludes connectors. Width excludes rack ears.) |
Product weight |
|
Matrix 12800 wideband | 57.4 lbs (26.0 kg) |
Matrix 12800 sync | 54.0 lbs (24.5 kg) |
Matrix 12800 audio | 43.9 lbs (19.9 kg) |
Shipping weight |
|
Matrix 12800 wideband | 76.7 lbs (35 kg) |
Matrix 12800 sync | 73.3 lbs (34 kg) |
Matrix 12800 audio | 66 lbs (30 kg) |
DIM weight, |
|
international (all models) | 77 lbs (35 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Listings | UL, CUL |
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
MTBF | 30,000 hours |
Warranty | 3 years parts and labor |
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
364
usa West | usa east | www.extron.com |
+1.714.491.1500 / +800.633.9876 | +1.919.863.1794 / +800.633.9876 | © 2008 Extron Electronics. All rights reserved. |
+1.714.491.1517 FAX | +1.919.863.1797 FAX | Pricing and specifications may change without notice. |