Extron electronic MAV manual Audio buttons

Operation, cont’d

			LED key:	= off,	= on	Press
						E
			INPUTS			VIDEO AUDIO
1	2 3 4	5 6 7 8	9 10 11 12 13 14	15	16
					CONTROL	I/O

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ENTER PRESET VIEW ESC VIDEO AUDIO

OUTPUTS

E

38

Figure 3-10 — Example 4, step E: Viewing the current configuration, audio only

FPress and release the Video and Audio buttons to toggle the Video LED on and the Audio LED off (figure 3-11).

If video ties are established for input 5, the output LEDs for all video outputs tied to input 5 light. If no ties are established for input 5, all output LEDs turn off.

LED key: = off, = on

Press Press

F

								INPUTS
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	VIDEO	AUDIO
																CONTROL	I/O

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ENTER PRESET VIEW ESC VIDEO AUDIO

OUTPUTS

F

1 3 4 8

Figure 3-11 — Example 4, step F: Viewing the current configuration, video only

Muting and unmuting video and/or audio

Individual outputs can be muted or unmuted by doing the following:

1.	Press the Esc button to clear any input LEDs, output LEDs, or control LEDs
	that may be on.
2.	Press and release the View button.
3.	Select video, audio, or both to mute or unmute by pressing the Video and/or
	Audio buttons.
4.	One at a time, press and hold the output button(s) for the desired output(s)
	for approximately 2 seconds. The output LED(s) for the selected output(s)
	blink to indicate the mute or return to their previous state to indicate the
	unmute.
5.	Press and release the View button to return to normal switcher operation.

1. You can mute video and audio, video-only, or audio-only outputs. Pressing and releasing the Video and Audio buttons toggles each selection on and off.

3-10 MAV Series Switchers • Operation