Instaltal lationandandOperation,cont’d
Mounting the MIX 301
The MIX 301 can be set on a table, mounted on a rack shelf, mounted on the back of the rack, mounted under a desk or table, or installed on a projector mount.
Tabletop use
The MIX 301 comes with four,
1.Attach the rubber feet to the underside of the MIX 301 near the corners of the unit.
2.Place the MIX 301 unit in the desired location.
UL rack mounting guidelines
The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the MIX 301 in a rack.
1.Elevated operating ambient temperature — If installed in a closed or
2.Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.
3.Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.
4.Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
5.Reliable earthing (grounding) — Maintain reliable grounding of