Extron electronic user manual Rack installation, MIX 301 Installation and Operation

Models: MIX 301

1 18
Download 18 pages 57.48 Kb
Page 7
Image 7
Rack installation

Rack installation

The MIX 301 can be rack mounted using either the RSF 123 VersaTools 19" 1U rack shelf (Extron part #60-190-20), the RSB 123 basic VersaTools rack shelf (Extron part #60-604-20), an RSU 129 standard universal 1U rack shelf (Extron part #60-190-01), or an RSB 129 1U basic rack shelf (Extron part #60-604-01). Figure 1 shows the VersaTools rack shelf, and figure 2 shows a standard rack shelf. On the standard rack shelf, there are eight mounting locations at the front of the shelf or eight at the rear of the shelf.

1.Remove the rubber feet from the unit, if previously installed.

2.Mount the unit on the rack shelf, using two 4-40 x 3/16" screws. These screws go into holes on the underside of the unit near the left-front and right-rear corners.

Only products in the VersaTools line can be mounted on a VersaTools rack shelf.

3.Install blank panels (included with Extron part #60-190-xx, optional with Extron part #60-604-xx) or other units on the rack shelf.

VersaTools

Rack Shelf

Quarter Rack Width MIX 301 • Installation and Operation

False Front Face Plate

Eighth Rack Width

False Front Face Plate

(2) 4-40 x 3/16" Screws

Figure 1 — Mounting the MIX 301 on a VersaTools rack shelf

MIX 301 • Installation and Operation

3

Page 7
Image 7
Extron electronic user manual Rack installation, MIX 301 Installation and Operation