The following flowchart shows the main menus and submenus available for all four switcher models. Items within the dashed lines are not offered on all models.
Power
on
FIRMWARE
Ver 1.XX
EXTRON | 2 sec. | INPUT |
| ||
MLS506SA | 2 sec. | #2 |
|
|
Video input format
selection/configuration is not available
or necessary for the MLS 306.
RGB delay time:
MENU |
NEXT |
VIDEO |
CONFIG |
MENU |
Select the video type | Select |
for inputs | |
Default: Vid. | another |
| input. |
Input #2
<Vid>YUV
3
VOLUME
ADJUST
Input #2
Vid<YUV>
Input #3
<Vid>YUV
VOLUME
ADJUST
Input #3
Vid<YUV>
Select
another
input.
5
Inputs
are RGB only.
Input #5
RGB Only
NEXT
0 seconds to 5 seconds in 0.5 sec. intervals.
RGBdelay
0.0 sec
VOLUME
ADJUST
RGBdelay
5.0 sec
NEXT / MENU
Set audio output level | Adjust bass | Adjust treble |
per input. | per input (2dB | per input (2dB |
MLS 306/506: | increments). | increments). |
MLS 506MA/506SA: 0 to 100 steps |
AUDIO
ADJUST
MENU
NEXT
Level
#2 050
VOLUME
ADJUST
Level
#2 067
NEXT
NEXT
| Bass |
#2 | +00dB |
VOLUME
ADJUST
Bass
#2
Treble
#2 +00dB
VOLUME
ADJUST
Treble
#2 +06dB
MENU
Set the overall left / right audio output balance.
| The Effects submenu | |
| is available for the | |
| MLS 506MA and | |
| MLS 506SA only. | |
| Default: the Effects | |
Stereo: Audio Out | Return is disabled. | |
Enable: the Effects | ||
outputs stereo audio. | ||
Return will be active, | ||
Mono: the Audio Out | ||
its input will be sent | ||
signal is the same | to the Audio Out and | |
on both left & right. | amplified outputs. |
The Speaker Load submenu is available for the MLS 506SA only.
4ohm: 4 ohm load on stereo amplified output.
8ohm: 8 ohm load on stereo amplified output.
NEXT | NEXT | Output | NEXT |
AUDIO | Balance | Effects | |
SETTINGS | M<Stero> | E<Dsabl> |
MENU
VOLUME | VOLUME | VOLUME |
ADJUST | ADJUST | ADJUST |
Balance |
| Output |
| Effects |
| <Mono>St |
| <Enabl>D | |
|
|
|
|
|
MENU |
| EXIT |
| ||
NEXT |
| MENU |
| ||
|
|
or timeout
NEXT
SpkrLoad <4ohm> 8
VOLUME
ADJUST
SpkrLoad 4 <8ohm>
NEXT / MENU
MediaLink Switchers • Operation |
