MR and MR D Series Installation Guide
Modifying a Mud Ring
Each mud ring size can be modified to make the mud ring one
Segment Assembly Screws
| 2 Small Top/bottom Segments | 2 Small Top/bottom |
Small Top/bottom Segment | Segments | |
MR 200 |
| MR 200 |
|
| Modified to be |
Figure 3 — Modifying an MR mud ring
NThe
Modify the mud ring as follows:
1. As necessary, remove the segment assembly screws that hold the segments together, and add, remove, or replace a top segment and a bottom segment.
NFor example, to modify an MR 300 to be a
2. Replace and install new segment assembly screws as necessary.
Part Numbers
The MR/MR D Series mounting brackets (mud rings) are available in the following configurations:
Name | Description | Part number |
|
|
|
MR 100 | ||
MR 100D | ||
MR 200 | ||
MR 200D | ||
MR 300 | ||
MR 300D | ||
MR 400 | ||
MR 500 | ||
MR 600 | ||
MR 700 | ||
|
|
|
www.extron.com
Extron Electronics, USA 1230 South Lewis Street Anaheim, CA 92805 800.633.9876 714.491.1500 FAX 714.491.1517
Extron Electronics, Europe |
| Extron Electronics, Asia | ||
| ||||
Beeldschermweg 6C |
| 135 Joo Seng Rd. | ||
3821 AH Amersfoort, The Netherlands |
| PM Industrial Bldg., Singapore 368363 | ||
+800.3987.6673 | +31.33.453.4040 |
| +800.7339.8766 | +65.6383.4400 |
FAX +31.33.453.4050 |
| FAX +65.6383.4664 |
© 2008 Extron Electronics. All rights reserved.
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Japan
+81.3.3511.7655 FAX +81.3.3511.7656