Extron electronic MTPX PLUS 128 Remote Control and Optimizing the Video, cont’d, EX$Lrpt

Audio/RS-232 TP input (wire pair 3 and 6) configuration

(switcher to host)

(host to switcher)

Response

ASCII command

Additional description

Command

Refer also to the MTPX Plus User’s Manual at www.extron.com.

Refer also to the MTPX Plus User’s Manual at www.extron.com.

4-4 MTPX Plus Series • Remote Control and Optimizing the Video

MTPX Plus Series • Remote Control and Optimizing the Video 4-5

Command/response table for selected SIS commands

Command	ASCII command	Response	Additional description
	(host to switcher)	(switcher to host)

Create ties

N• Commands can be entered back-to-back in a string, with no spaces; for example; 1*1!02*02&003*003%4*24$.

•The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%). N The & tie command for RGB and the % tie command for video can be used interchangeably.

NThe & read tie command for RGB and the % read tie command for video can be used interchangeably.

Tie input to output video and	X!*X@!	OutX@•InX!•All]	Tie the video and audio from input X! to
audio			output X@.
Example:	1*3!	Out03•In01•All]	Tie input 1 video and audio to output 3.
Tie input to output, RGBHV video	X!*X@&	OutX@•InX!•RGB]	Audio breakaway.
only
Example	10*4&	Out04•In10•RGB]	Tie input 10 RGB to output 4.
(see second Note, above):
Tie input to output, video only	X!*X@%	OutX@•InX!•Vid]	Audio breakaway.
Example	7*5%	Out05•In07•Vid]	Tie input 7 video to output 5.
(see 2nd Note, above)
Tie input to output, audio only	X!*X@$	OutX@•InX!•Aud]	Audio breakaway.
Example:	24*04$	Out04•In24•Aud]	Tie input 24 audio to output 4.
Read RGB output tie	X@&	X!]	RGBHV input X! is tied to output X@.
Read video output tie	X@%	X!]	Video input X! is tied to output X@.
Read audio output tie	X@$	X!]	Audio input X! is tied to output X@.
N X!= Input number		00 – (maximum number of inputs for your model) (00 = untied)
X@= Output number		01 – (maximum number of outputs for your model)

NThe RS-232 output insert ports, when enabled (EX$*0Lrpt}), override the audio/RS-232 TP input configurations.

Configure input as audio	X!*0\	TypX!*0]	Define the audio/RS-232 input as audio,
			such as provided by an MTP 15HD A
			transmitter.
Configure input as RS-232	X!*1\	TypX!*1]	Define the audio/RS-232 input as
			bidirectional serial communications,
			such as provided by an MTP 15HD RS
			transmitter.
Read TP input configuration	X!\	X#]	Show the audio/RS-232 wire pair input
			definition.
RS-232 output inserts enables
Disable an RS-232 output insert	EX$*0Lrpt}	LrptX$*0]	Disable the RS-232 insert on the X$ output.
port
Enable an RS-232 output insert port	EX$*1Lrpt}	LrptX$*1]	Enable the RS-232 insert on the X$ output.
Read RS-232 output insert status	EX$Lrpt}	X%]	Show the status of the RS-232 output
			insert.
N X!= Input number		01 – (maximum number of inputs for your model)
X#= Audio/RS-232 wire pair input type		0 = audio
X$= RS-232 output insert port		1 = RS-232
		MTPX Plus 168, 816, 1616	01 – 08
X%= RS-232 output insert status		MTPX Plus 1632, 3216, 3232	01 – 16
		0 = disabled

1 = enabled

Remote Control and Optimizing the Video, cont’d