Extron electronic MVX VGA A Command, ASCII command, Response, Additional description, Mvx Vga

Refer also to the	MVX VGA
MVX VGA A User’s Manual at www.extron.com.	A Matrix Switchers • Remote Control
	4-3

Command	ASCII command	Response	Additional description
	(host to switcher)	(switcher to host)

Create ties

N• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.

•The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%). N When you create a tie where X! = 00, you tie no input to the specified output (X@) (untie X@).

NThe & tie command for RGB and the % tie command for video can be used interchangeably.

NThe & read tie command for RGB and the % read tie command for video can be used interchangeably.

Tie input X! to output X@, video	X!*X@!	OutX@•InX!•All]	Tie input X!‘s video and audio to output X@.
and audio
Example:	1*3!	Out03•In01•All]	Tie input 1 video and audio to output 3.
Tie input X! to output X@, RGBHV	X!*X@&	OutX@•InX!•RGB]	Tie RGB only (video breakaway).
Example	10*4&	Out04•In10•RGB]	Tie input 10 RGB to output 4.
(see 3rd Note, above):
Tie input X! to output X@, video	X!*X@%	OutX@•InX!•Vid]	Tie video only (video breakaway).
Example	7*5%	Out05•In07•Vid]	Tie input 7 video to output 5.
(see 3rd Note, above)
Tie input X! to output X@, audio	X!*X@$	OutX@•InX!•Aud]	Tie audio only (audio breakaway).
Example:	12*04$	Out04•In12•Aud]	Tie input 12 audio to output 4.
Read RGB output tie	X@&	X!]	RGBHV input X! is tied to output X@.
Read video output tie	X@%	X!]	Video input X! is tied to output X@.
Read audio output tie	X@$	X!]	Audio input X! is tied to output X@.
N X!= Input number	00 – (maximum number of inputs for your model) (00 = untie)
X@= Output number	01 – (maximum number of outputs for your model)