Extron electronic MVX VGA A Remote Control, cont’d, VX*XXAX*XX X1, EX1@CV, VrbX1@, Verbose mode

4-6

MVX VGA AMatrix Refer also tothe

Command	ASCII command	Response	Additional description
	(host to switcher)	(switcher to host)

Lock (executive) modes

NSee “Setting the front panel locks (Executive modes)” on page 3-4 for more information on the Lock modes.

Lock all front panel functions	1X	Exe1]	Enable Lock mode 1.
Lock advanced front panel functions	2X	Exe2]	Enable Lock mode 2.
Unlock all front panel functions	0X	Exe0]	Enable Lock mode 0.
View lock status	X	X&]

Information requests

Remote Control,

Switchers MVX VGA A User’s

•

Information request	I
Request part number	N
Query controller firmware version	Q
Example:	Q

VX*XX(•AX*XX(] X1)]

X1!]

1.23]

VX*XX( = video size, AX*XX( = audio size

The factory-installed controller firmware version is 1.23 (sample value only).

cont’d

Manual at www.	Remote
extron.com.	Control

Verbose mode

Set verbose mode	EX1@CV}		VrbX1@]
Read verbose mode	ECV}		X1@]
N X&= Lock mode	0, 1, or 2
X*= Inputs	Total number of inputs for this switcher
X(= Outputs	Total number of outputs for this switcher
X1)= Part number	See the MVX VGA A User’s Manual, for a complete list of part numbers.
X1!= Firmware version number to second decimal place (x.xx)
X1@ = Verbose mode	0	= clear/none (default for Telnet connection)		2	= tagged responses for queries
	1	= verbose mode (RS-232/RS-422 default)		3	= verbose mode and tagged for queries