Remote control
Tuner
PROBLEM | POSSIBLE CAUSE | SOLUTION |
The remote control does not | The remote control is not ready for your | Set the mode selector correctly, then |
operate as you intend. | intended operation. | press the corresponding source selecting |
|
| button before operation. |
|
|
|
The remote control does not | There is an obstruction blocking the | Remove the obstruction. |
work. | remote sensor on the receiver. |
|
|
|
|
| Batteries are weak. | Replace batteries. |
|
|
|
| The mode selector is set to the incorrect | Set the mode selector to the proper |
| position. | position. |
Continuous hiss or buzzing | Incoming signal is too weak. | Connect an outdoor FM antenna (not |
during FM reception. |
| supplied) after unplugging the power |
|
| cord, or contact your dealer. |
|
|
|
| The station is too far away. | Select another station. |
|
|
|
| A wrong antenna is being used. | Check with your dealer to be sure you |
|
| have the correct antenna. |
|
|
|
| Antennas are not connected properly. | Check the connections. |
|
|
|
Occasional cracking noise during | Ignition noise from automobiles. | Move the antenna farther from |
FM reception. |
| automobile traffic. |
|
|
|
51
