JVC RX-D411S manual 5Try to operate your VCR by pressing VCR

To change the transmittable signals for operating a VCR

1 Press and hold VCR .

• Keep the button pressed until step 3 is finished.

2 Press VCR.

3 Enter the manufacturer code using the numeric buttons (1 – 9, 0).

See “Manufacturer codes for VCR” on the right.

4 Release VCR .

Now, you can perform the following operation on the VCR:

VCR : Turn on or off the VCR.

After pressing VCR, you can perform the following operations on the VCR:

CHANNEL +/–:	Change the TV channel numbers on
	the VCR.
1 – 10, 0, h10:	Select the TV channel numbers on
	the VCR.
3:	Start playback.
7:	Stop playback.
8:	Pause playback. To release it, press 3.
¡:	Fast-forward a tape.
1:	Rewind a tape.

See the manual supplied with the VCR for details.

5Try to operate your VCR by pressing VCR

.

Your VCR turns on or off when you have entered the correct code.

If more than one code is listed for your brand of VCR, try

each one until the correct one is entered.

Manufacturer codes for VCR:

Manufacturer	Codes
JVC	01
Akai	02, 36
Bell+Howell	03, 16
Blaupunkt	04
CGM	03, 05, 16
Daewoo	34
DIGITAL	05
Fisher	03, 16
G.E.	06
Grundig	07
Hitachi	08, 09
Loewe	05, 10, 11
Magnavox	04, 05
Mitsubishi	12, 13, 14, 15
Nokia	16
Nordmende	17, 18, 19, 31
Orion	20
Panasonic	21
Philips	05, 22
Phonola	05
Saba	17, 18, 19, 23, 31
Samsung	24, 25
Sanyo	03, 16
Sharp	26, 27
Siemens	07
Sony	28, 29, 30, 35
Telefunken	17, 18, 19, 31, 32
Toshiba	33

Initial setting: 01

Manufacturer codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

48