JVC RX-D411S manual Operating other JVC products, 7VCR

Operating other JVC products

You can use the supplied remote control to operate not only this receiver but also other JVC products.

•Refer also to the manuals supplied with the other products.

–Some JVC VCRs can accept two types of the control signals—remote codes “A” and “B.” This remote control can operate a VCR whose remote control code is set to “A.”

–Some JVC DVD recorders can accept four types of the control signals. Select an appropriate code for your DVD recorder (see page 46).

•To operate other products, aim the remote control directly at the remote sensor on the target product.

7TV

You can always perform the following operations:

TV : Turn on or off the TV.

TV VOL +/–:Adjust the volume on the TV.

TV/VIDEO: Change the input mode (either video input or TV tuner) on the TV.

After pressing TV, you can perform the following operations on the TV:

CHANNEL +/–:Change the channel numbers.

1 – 9, 0, 100+ (h10): Select the channel numbers.

RETURN (10): Switch between the previous channel and the current channel.

7VCR

You can always perform the following operation:

VCR : Turn on or off the VCR.

After pressing VCR, you can perform the following operations on the VCR:

CHANNEL +/–:	Change the channel numbers on the VCR.
1 – 9, 0:	Select the channel numbers on the VCR.
3:	Start playback.
7:	Stop playback.
8:	Pause playback. To release it, press 3.
¡:	Fast-forward a tape.
1:	Rewind a tape.

45