Extron electronic MVX VGA A setup guide Remote Control, cont’d, Button-Label Generator Program

Remote Control, cont’d

4. Follow the on-screen instructions. The installation program creates a C:\Program Files\Extron\ Matrix_Switchers directory and an “Extron Electronics\ Matrix Switchers” group folder. It installs the following four programs:

•MATRIX Switcher+ Control Program

•MATRIX Switcher+ Help

•Uninstall MATRIX Switcher

•Check for Matrix Updates

Starting the program

1.Click Start > Programs > Extron Electronics > Matrix Switchers > MATRIX Switcher + Control Pgm.

The Comm Port Selection window appears.

2.	Choose the comm (serial) port that is connected to the
	switcher.

NCheck the baud rate displayed in the comm port selection window. If you need to change the baud rate, click the Baud button and double-click the desired baud rate.

Click OK.

The Matrix Switchers Control Program is ready for operation.

4-8 MVX VGA A Matrix Switchers • Remote Control

Button-Label Generator Program

The Button Label Generator software creates labels that you can place in the translucent covers above and below the front panel input and output buttons. You can create labels with names, alphanumeric characters, or even color bitmaps for easy and intuitive input and output selection.

The Extron Button Label Generator is available on the Extron Web site, www.extron.com, under the Download Center tab and on the Extron Software Products DVD that accompanies the switcher.

Refer to the MVX VGA A Switcher User's Manual, chapter 5, “Matrix Software”, for operating the Button Label Generator program and appendix A, “Specifications, Part Numbers, Accessories”, for the procedure for removing and replacing the translucent covers.

MVX VGA A Matrix Switchers • Remote Control 4-9

Refer also to the MVX VGA A User’s Manual at www.extron.com. Refer also to the MVX VGA A User’s Manual at www.extron.com.