Extron electronic 68-713-01, P/2 DA2XI MT Introduction

P/2 DA2xi MT User Guide • Introduction

Introduction

The Extron P/2 DA2xi MT is a distribution ampliﬁer that accepts video input from a VGA,

XGA, UXGA, or QXGA compatible PC and distributes the signal to separately buffered

outputs. The output on the back of the unit can be extended with Extron VGA Series cables

from 6 feet to 250 feet in length. The MT model also has audio input and output.

• Power and Signal LED — Green LED = power + signal. Amber LED = power but no

signal. Off = no power.

• Gain and Peak DIP switch — Use this feature to compensate for longer cable runs.

• Out Imp DIP switch — Changes the output impedance to be compatible with all

projectors.

• Cable retention chain — The input cable can be secured to the unit with the supplied

chain (attached to the right standoff nut of the input VGA connector) to prevent the

cable from being lost or misplaced.

MONITOR

AUDIO

INPUT

Figure 1. P/2 DA2xi MT Distribution Amplifier