Extron electronic QSD 204 D manual Under-furniture mounting, 4 #8 Wood screws

Under-furniture mounting

For under-tabletop or under-desktop placement (see illustration below), install the optional under-furniture mounting kit (part #70-219-01), as follows:

Remove and Reinstall

Under-Desk(4) Screws from Top

Mounting Bracket

1

2

3

4

C
OL/
TNT
CE
NTER	M
	ENU
BR
CO T/
NT B
LAN
KING
	NEXT

	ADJ
	UST
DIGITAL	QU
	AD-S	QSD
	TAN
	DA
		RD	DE		204
				COD
					ER

(4) #8 Wood screws

Mounting the QSD 204 on the underside of furniture

1. Attach the mounting brackets to the QSD 204 decoder using the decoder’s existing top cover screws. See the above illustration.

2. Place the decoder against the underside of the furniture, then mark the location of the bracket screw holes on the mounting surface.

3. Drill 3/32” (2 mm) diameter pilot holes, 1/4” (6.3 mm) deep into the marked bracket screw holes on the furniture mounting surface.

4. Insert the four #8 wood screws into the four pilot holes. Tighten each screw into the mounting surface until about 1/4” of the screw head still protrudes from the mounting surface.

5. Align the mounting screws with the slots in the brackets and place the decoder flush against the mounting surface. Position the decoder forwards or backwards in the bracket slots, then tighten the four screws.

QSD 204 • Installation and Operation 2-3