Extron electronic RGB 340 RGB 324/RGB 326 Cut-outTemplate, Dimensions and Template, cont’d

Dimensions and Template, cont’d

RGB 324/RGB 326 Cut-out Template

Use the full-size template below as a guide to mark and cut the hole in the wall or furniture through which the buffer will be installed. The template includes the recommended 0.1” (0.25 cm) clearance on all sides of the electrical wall box to allow room for the raised areas surrounding the knockouts. See chapter 2 for details on installing the buffers.

The light gray area represents the layout of the electrical box (3.75"H x 3.75"W) against the rear of the RGB 324/RGB 326 front panel.

To install the interface buffer without a wall box, use the cut-out area (3.00"H) indicated by the dotted line.

The dashed line indicates the cut-out area (3.95"H x 3.95"W) for installing the electrical wall box.

B-6 RGB 324/326/340 • Dimensions and Template RGB 324/326/340 • Dimensions and Template B-7