Features
6
| 11 |
| 7 |
1 |
|
2 | 8 |
| |
3 | 9 |
4 |
|
5
10
Figure 1 — Speaker Features
Dimensions: | SI 26: 13.0" H x 8.5" W x 6.75" D |
| (33.0 cm H x 21.6 cm W x 17.1 cm D) |
| SI 28: 16.5" H x 11.5" W x 8.6" D |
| (41.9 cm H x 29.2 cm W x 21.9 cm D) |
A Dual tuned bass reflex ports
B 1"
C Front locking access (allows for speaker position adjustment) D 6.5" (SI 26) or 8" (SI 28)
E Grill and enclosure may be painted to match environment F Weather resistant construction
G Push down spring terminals
H Wall mount assembly with unique
I Back cover for use when speakers are not wall mounted J Allen hex tool
K Extron logo (fits in grill to cover locking port access) L 8 ohm nominal impedance
M 75 watts (SI 26) or 90 watts (SI 28) continuous pink noise N 150 watts (SI 26) or 180 watts (SI 28) continuous program O Internal driver overload protection circuit
NFor items 12 through 15, see "Specifications", page 7 of this manual.
Introduction
About the SI 26 and SI 28 Speakers
The Extron System INTEGRATOR™ SI 26 and SI 28
•SI 26 features a 6.5"
•SI 28 features an 8"
Figure 1 — Extron SI surface speakers
NExtron recommends that the wiring installation is performed by a professional audio equipment installer.
CUse cable clamps to hold the cables in place for strain relief. Trim back/insulate exposed cable shields with heat shrink to reduce the chance of short circuits
i | SI 26 and SI 28 Speakers • Features | SI 26 and SI 28 Speakers • Introduction | 1 |