Specifications — SW2 VGA DA2 A/AF/AF R
Video
Gain | Unity |
Bandwidth | 300 MHz |
Video input
Number/signal type | 2 |
Connectors | 2 VGA female |
Nominal level | 1.0 |
| 0.7 |
Minimum/maximum levels | Analog: 0.3 V to 1.5 |
Impedance | 75 ohms |
Horizontal frequency | 15 kHz to 145 kHz |
Vertical frequency | 30 Hz to 170 Hz |
Video output
Number/signal type | 2 buffered |
Connectors | 2 VGA |
Nominal level | 1.0 |
| 0.7 |
Minimum/maximum levels | 0.4 V to 1.8 |
Impedance | 75 ohms |
*RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the
Sync
Input type | RGBHV, RGBS, RGsB*, RsGsBs*, |
Output type | RGBHV, RGBS, RGsB*, RsGsBs*, |
Input level | 1.7 V to 5.0 |
Output level | TTL: 5.0 |
Input impedance | 510 ohms |
Output impedance | 50 ohms |
Max. input voltage | 5.0 |
Max. rise/fall time | 40 ns |
Polarity | Positive or negative (follows input) |
Audio
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.03% @ 1 kHz at nominal level |
S/N | >90 dB at maximum output (unweighted) |
Crosstalk | |
Stereo channel separation | >80 dB @ 1 kHz |
CMRR | >75 dB @ 20 Hz to 20 kHz |
Audio input
Number/signal type | 2 stereo, unbalanced |
Connectors | (2) 3.5 mm female stereo jacks |
Impedance | >10k ohms, balanced/unbalanced, AC coupled |
Nominal level | |
Maximum level | +8 dBV, (balanced or unbalanced) at 1% THD+N |