Remote Control, cont’d
Using the memory feature
In addition to performing the basic functions, the IR 601 remote control provides a memory storage and recall feature. The VSC 150 offers 30
The VSC 150 also offers three additional
The IR 601 has four Memory buttons for storing and recalling up to three presets. To store and recall combinations of settings with the IR 601, follow these steps:
1. | Set the sizing/zoom, centering and filtering settings |
| for the desired computer video source by using the |
| front panel controls, |
| controls. |
2. | Press the Store button in the Memory area of the |
| IR 601 control. The Power/signal lock LED flashes for |
| 4 seconds. During that period, press the button |
| labeled with the number (1, 2 or 3) corresponding to |
| the desired memory. The image settings are stored in |
| a user memory slot corresponding to that number. If |
| the button is pressed after the LED stops flashing, the |
| settings are not stored. |
3. | To recall a setup that has been stored in memory, press |
| the appropriate numbered Memory button. The |
| combination of zoom, sizing and filtering level |
| settings are recalled. |
The same three
1. Set the sizing/zoom, centering and filtering settings for the desired computer video source by using the front panel controls,
2. Use the memory commands in the Command/ response table on page
VSC 150
AAppendix
Specifications
Accessories and Part Numbers
Specifications
Included Parts
Accessories