Manuals / Faber / Kitchen Appliance / Ventilation Hood

Faber INCA SMART installation instructions Plan Your Ductwork, For Installations with Liners

Models: INCA SMART

1 10
Download 10 pages 40.78 Kb
Page 5
Image 5

TOOLS NEEDED FOR INSTALLATION

PARTS SUPPLIED FOR INSTALLATION

• Saber Saw or Jig Saw

• 1

Backdraft Damper

• Drill

• 10 Screws

• 1 1/4" Wood Drill Bit

• Field Wiring Box

• Pliers

• 1

Literature Package

• Phillips Screwdriver

PARTS NEEDED FOR INSTALLATION

• Wire Stripper or Utility Knife

• Metal Snips

• 2

Conduit Connectors

• Measuring Tape or Ruler

• Power Supply Cable

• Level

• Scews for Field Wiring Box

• Pencil

• 1

Wall or Roof Cap

• Caulking Gun

• All Metal Ductwork

• Duct Tape

 

 

OPTIONAL ACCESSORIES AVAILABLE

•Charcoal Filter Kit

For recirculating installations only, replace charcoal filters as needed part # 6093130

•Liners

Create a perfectly-sealed, non-combustible perimeter around the Inca Smart. Depth adjustable from 16" - 17 7/8".

Standard Liner 30 Stainless - part # 620000304 Standard Liner 36 Stainless - part # 620000305

PLAN YOUR DUCTWORK

The Inca Smart requires 5" round ductwork. To ensure that the blower performs to its

 

highest possible capacity, ductwork should be as short and straight as possilbe.

 

Make your ductrun as straight and short as possible. The ductrun should not exceed 25

 

equivalent feet if ducted with the required minimum of 5" round duct. Count 45º angles

 

as 3 feet, 90º elbows as 5 feet, and 90º flat elbows as 12 feet.

 

For best results, use no more than three 90° elbows. Make sure that there is a minimum

 

of 24" of straight duct between elbows if more than one is used. Do not install two

 

elbows together. If you must elbow right away, do it as far away from the hood's

 

exhaust opening as possible.

!WARNING

When building a custom hood, always follow all applicable codes and standards.

The Inca Smart can be used in standard 30" or 36" wide cabinetry or with custom hoods 30" wide and up.

For custom/wood hoods, choose either acustomlinerorourStandard Liner designed for 30" and 36" wide installations. Liners create a perfectly-sealed, non-combustible finish for the underside of your custom/wood hood.

The Standard Liners are made up of two sections: a larger, rear section (pre-cut out for insertion of the Inca Smart) and a front section for a total adjustable depth between 16" and 17 7/8".

!!!IMPORTANT NOTE: DO NOT REMOVE THE ADDITIONAL

P E R F O R AT E D S E C T I O N AROUND THE PRE - CUT- OUT WHEN INSTALLING THE STANDARD LINER WITH THE INCA SMART MODEL. THIS PERFORATION IS ONLY REMOVED FOR USE WITH THE INCA HC SS MODEL.

Consider the shape, size, and weight of the Inca Smart and Liner to determine the configuration of the custom/wood hood. See

FOR INSTALLATIONS WITH LINERS

CUSTOM/WOOD

HOOD

INCA SMART

1.The custom/wood hood must have a sturdy base (3/4" plywood recommended) to accomodate the cut-out for the Inca Smart. The base must be recessed to accomodate the height of the Liner (see LINER DIMENSIONS on Page 4). The Liner attaches to the bottom of the base using screws appropriate for the size and material of your custom/wood hood. The Inca Smart inserts into the cut-out in the Liner and base.

2.Position the rear section of the Liner so that it abuts the back edge of your custom/wood hood. Using a pen, trace the outline of the pre-cut out. Remove the Liner and proceed to MAKE YOUR CUT-OUTSon Page 6. Install both sections of the Liner and proceed to INSTALL THE RANGEHOOD on Page 6.

Version 10/05 - Page 5

RANGEHOODDIMENSIONSAND LINER DIMENSIONS on Page 4.

Page 4 Page 6
Page 5
Image 5
Faber INCA SMART installation instructions Plan Your Ductwork, For Installations with Liners
Page 4 Page 6

INCA SMART specifications

The Faber INCA SMART is an innovative kitchen hood that combines advanced technology with stylish design to elevate the cooking experience. This appliance is not only functional but also serves as an aesthetic addition to modern kitchens. Its sleek, minimalist design ensures that it seamlessly blends into various kitchen decors while providing powerful performance.

One of the key features of the Faber INCA SMART is its powerful extraction capability. The hood is equipped with a high-efficiency motor that effectively removes smoke, odors, and steam from the kitchen, allowing for a pleasant cooking environment. With multiple speed settings, users can easily adjust the extraction power based on their culinary needs, ensuring optimal air quality at all times.

The INCA SMART also boasts advanced air filtration technology. The filters are designed to capture grease and particulates, ensuring the air in the kitchen remains clean and fresh. The grease filters are washable, making maintenance effortless and prolonging the lifespan of the appliance. Additionally, the option for charcoal filters allows for recirculation mode, making it suitable for spaces lacking external ventilation.

A standout feature of the Faber INCA SMART is its smart control system. This technology allows users to operate the hood effortlessly through a simple touch control panel. It features intuitive icons that make it easy to navigate settings, while the sleek lighting enhances visibility in the cooking area. The integrated LED lights not only illuminate the workspace but also consume less energy compared to traditional bulbs, making it an environmentally friendly choice.

Another significant characteristic of the INCA SMART is its low noise level. Faber has designed this kitchen hood to operate quietly, ensuring a peaceful cooking experience. This is particularly beneficial for open-plan living spaces where noise can easily carry between rooms.

Stylish and efficient, the Faber INCA SMART is available in various sizes to accommodate different kitchen layouts. Its versatile design options and advanced features make it a premium choice for homeowners seeking both functionality and aesthetics in their kitchen hoods. This appliance is perfect for anyone looking to enhance their culinary space while ensuring a clean and comfortable environment.